7.1 How to enable/disable module for MultiCompany
- First at all you need to choose Setting->CRM Settings
Modules for Custom Numbering - Now, in Other Settings you can see Multi Company tab. Please choose it.
Modules for Custom Numbering - Here, you can see all your modules and also modules selected for MultiCompany. You can select or deselect what you need.
Modules for Custom Numbering
7.2 License settings
Since December 2019/January 2020 all our modules will be using Installer to manage licenses. Please check our Installer pages for more information.
You can access the License settings like its shown below:
(there can be more options from the pick-list, depends on the module)
After accessing the License window you can see screen bellow with following information:
- Module name, Your Vtiger domain URL
- Description, if license is activate or not:
– your license is currently active,
– your license is not active and you need active it via Installer.
To activate or manage license, click on the
button.
7.2.1 Deactivate license
If you want to deactivate your license, please provide following steps:
- Go to your Installer, by a click on Notifications Icon
and then on the button
,
or via Main Menu – Settings – CRM Settings – Extensions – ITS4YouInstaller - The following screen will appear (see below):
Installer – deactivation of license You can deactivate license by click on the button

Note:The module will be deactivated but not uninstalled and license will be removed from the Activated Licenses tab.
7.2.2 Reactivate license
To reactivate a license after deactivation, you need to follow the same process as you activated it first time:
- Click on the
button and enter your license key.

- Confirm with
button.
When the license was activated you can see module available in the Modules tab below.
Note: To see modules and manage licenses you have to log in to our e-shop with @email and password via
button (top right screen side in Installer module).
7.3 Update Multi Company
The upgrade of the module is initiated manually or via our Installer.
Updating via Installer:
- open the Installer in the CRM
- in the Modules tab find your installed module and you should see the
button available - If the new version is available, you will be notified via Installer Notifications icon

Updating MultiCompany manually:
Click on Upgrade Multi Company link in Customize tab of MultiCompany.
So please refer to above installation part for details how to initiate the import of the module from the file. As can be seen on following picture you will be notified that the MultiCompany module already exists. The upgrade will start immediately when you click on the
button.
After upgrade the notification about successful upgrade is shown.
7.4 Uninstall Multi Company
If you need to remove the module from your Vtiger you have two options:
- Uninstall via Installer.
- Manually via going to module Settings and choose Uninstall option.
7.4.1 Uninstall via Installer
You have also option to remove the module via Installer window by accessing the Settings – Uninstall window:
- Go to your Installer, by a click on Notifications Icon
and then on the button
,
or via Main Menu – Settings – CRM Settings – Extensions – ITS4YouInstaller - Find the module you need to uninstall in the Modules tab
- Via
pick list button choose the Uninstall option, you will be redirected to the Uninstall window. - Click on
button
- Confirm uninstall with
button
Now, the module has been removed from your Vtiger and your license has been deactivated. To use this module again, you need to provide installation and validation steps (see Installation chapter).
7.4.2 Manual Uninstall
There is also available option to remove MultiCompany from your Vtiger manually. To uninstall please provide following steps:
- Go to the list view of MultiCompany and in Customize choose option Uninstall Multi Company
How to uninstall Multi Company
- Click on
button
How to uninstall Multi Company
- Confirm uninstall with
button
How to uninstall Multi Company
Now, Multi Company is removed from your Vtiger and your license is deactivated. To use Multi Company again you need to provide installation and validation steps (see chapter 2.How to install Multi Company).
Need help with Multi Company?
Our support team answers questions about installation, templates and settings.